_______________________________________________________________________
See below for Three Special Limited-Time Offers from RectorSeal:
********** First Special Offer **********
Purchase a lightweight StrongArm cable puller and receive an UpperCut III cable cutter FREE!
This offer is only good on orders shipped by June 30, 2012, so contact us to arrange a demo today!
StrongArm Cable Puller FREE UpperCut III Cable Cutter
Features of the StrongArm:
- Quick & practical one-man operation
- Sets up & locks into position in 60 seconds
- No spare parts to get lost
- Unique swivel head can switch from underground to overhead pulls
- Self-positioning plate needs no anchoring for most pulls
- Quick disconnect pins
- Two speeds: 80 ft/m & 20 ft/m.
- Proven 4000 pound pulling power
- Removable base can hook to most trailer hitches.
Features of the UpperCut III:
- Cuts up to 1000 MCM Cu & AI wire
- Cuts up to 1200 ACSR wire
- 14” long with fixed handles
- Utility grade
Click here for more information on the StrongArm Cable Puller
Click here for more information on the UpperCut III
________________________________________________________________________
********** Second Special Offer **********
Purchase any size UpperCut cable cutter and receive Tri-Point 3-point step bits FREE!
This offer is only good on orders shipped by June 30, 2012, so contact us to arrange a demo today!
The UpperCut cable cutter is compact, powerful, and quick. It cuts through wire and cables with no wasted time or material due to its leverage-multiplying ratcheting system allowing for a smooth operation. The device cuts with honed steel alloy blades from the initital grip all the way through, and comes in 5 different sizes:
UpperCut I
- Cuts up to 750 MCM copper & aluminum wire
- 11 1/4″ long with handles fully extended
- Hand operation delivers precision & speed
- Telescoping handles extend for leverage
- Handles lock for safety
UpperCut II
- Cuts up to 1000 MCM Cu & Al wire
- Cuts up to 1200 ACSR wire
- 11 1/4″ long with handles fully extended
UpperCut III
- Cuts up to 1000 MCM Cu & Al wire
- Cuts up to 1200 ACSR wire
- 14 1/4″ long with fixed handles
- Utility grade
UpperCut IV
- Cuts up to 750 MCM copper & aluminum wire
- Cuts up to 1000 ACSR wire
- Ratcheting fixed blades
- 11 1/4″ long with handles fully extended
- Hand operation delivers precision & speed
- Telescoping handles extend for leverage
- Handles lock for safety
UpperCut V
- Cuts up to 1000 MCM 25kV wire
- 28″ long with telescoping handles & bi-pod legs
Along with your UpperCut cable cutter, you’ll get FREE Tri-Point 3-point step bits.
Tri-Point bits have great features:
- Innovative 3-cutting surfaces
- Speeds through cuts faster than 2-point bits
- Requires less torque
- Runs cooler
Click here for more information on the UpperCut Cable Cutter
_________________________________________________________________________
********** Third Special Offer **********
Purchase a Wire Snagger Master Set and receive a standard K.O. Puncher Kit FREE!
This offer is only good on orders shipped by June 30, 2012, so contact us to arrange a demo today!
Set up and tear down wire pulls in less that 5 minutes with Wire Snagger! It provides a competitive edge by dramatically reducing set-up and tear-down time for wire pulls. It also reduces labor cost per pull and significantly increases productivity since it allows the completion of many more pulls per day.
The Wire Snagger Master Set includes 20 tools that are all made of heat-treated stainless streel, and have a range of sizes that work with wire from 2/0 through 750MCM. In addition, the tools contain spring-loaded teeth for a stronger grip on the cable. The tool bodies easily navigate 90 degree bends in conduit, and longer lanyards increase spacing between tools, to reduce congestion in tight corners.
The K.O. Puncher delivers quick knock-outs in 5 seconds! It is simple to set up, fast cutting, and has the following features:
- Fits any standard cordless drill; no time wasted with ratcheting
- Wide size range; use adapter for other brands’ cups & cutters
- Can be used in freezing temperatures: works to -20 degrees F
- 2-3 times faster than hydraulic punches; no oil leaks
- Includes half-inch to 2-and-a-half-inch cups & cutters, 2 tri-points, draw studs, and case
Click here for more information on the Wire Snagger
Click here for more information on the standard K.O. Puncher Kit
_________________________________________________________________________