Simple- Easy-Reliable-Durable low cost single use device for pulling wire. Use once and then recycle along with scrap wire. The RectorSeal® Single-Use Wire Grabber™ is available in 18 sizes (8 AWG through 1000 mcm) to be used in sets to accommodate jobs of different sizes. Works on 600 volts through 35 KV wire and rated for both copper and aluminum wire. The lanyards are available in a variety of lengths to make staggering multiple wire pulls effortless especially through and around nineties. The small pulling head reduces friction; therefore there is no need to oversize conduit to accommodate the pulling head.

                                Click here for more information

.

Check out Sprecher + Schuh’s new KTU7 series of molded case circuit breakers!

Sprecher + Schuh’s new series KTU7 molded case circuit breakers are ideal for non-motor applications, providing short circuit and over-current protection (thermal and magnetic).  These UL489 listed circuit breakers have features and optional accessories that make them stand out from the crowd …

Features:

• Interrupt rating of 100kA (10A) and 65kA (30A) at 480Y/277V may allow higher overall panel short circuit rating
• Up to 6 times higher interrupting rating versus traditional miniature circuit breakers
• Smaller size saves panel space – just 45 x 102 x 85 mm
• Clear identification of trips and the source – short circuit or overload
• 100% rated up to 15A
• UL489 and CSA22.2 listed, IEC 60947-2 compliant

Accessories:

• Lockable operator knobs
• KTA7 for motor loads and KTU7 for non-motor loads can be connected to a common compact bus bar providing a space reducing, price effective solution and a clean finished appearance.
• Connection modules for the KTU7 circuit breakers simplify wiring and can reduce the number of DIN rails required, compacting panel space even further as well as reducing wiring errors and installation labor cost

Click here for more information

                                                                                                                                                                                                                               .

                    outstanding corrosion resistance! 
                                                  

Remke’s line of type 304 stainless steel cord connectors provides exceptional tensile strength and the highest levels of durability in severely corrosive environments filled with saltwater, acids or chemicals.  Upon request, type 316 stainless steel is also available.  Minimums may apply.  

More Great Features …

• All connectors include an embedded o-ring for enhanced sealing capabilities
• The combination tightening surface is a unique design that provides a large wrenching area for easy installation
• Optional wire mesh grips and stainless steel locknuts available 

Click here for more information

                                                                                                                                                                                                        .

                                                                                                      

Wire Mesh Tray System

Surface Metal Raceway

• Designed for routing low voltage power circuits, data network, and control cables in industrial applications
• System consists of a base section with a snap-on cover, dividers, and a wide range of fittings
• It’s easy to install, expand, and reconfigure
• Is available in both galvanized and stainless steel
• Click here for more information on the Surface Metal Raceway

                                                                         .

Allied Moulded’s new series of polycarbonate enclosures - POLYLINE - has features that won’t be found anywhere else …                               

• Industry exclusive multi-mounting capability
• Clear or solid cover offering good looks                
• Corrosion resistant 4X and non-conductive
• Adjustable hinged front panel design                        
• Molded-in back panel bosses and center bosses for mounting DIN rail

                       Click here for more information on POLYLINE enclosures

                                                                                                                                                                                                                             .

Sprecher and Schuh’s new L11 series 30 and 60 amp disconnect switches offers superior disconnect and short circuit protection needed, while only requiring a small amount of panel space – an optimal combination.  In addition, they are suitable for use in service entrance applications, and offer excellent short circuit protection for downstream equipment. 

Key Features…

• Can be operated at up to 600V
• Protects motors up to 30HP (@460V)
• Can install on circuits capable of delivering up to 200,000A of short circuit fault current
• Fusible and non-fusible
• Fusible switches have removable IP30 fuse carriers, and optional LED blown-fuse indicators
• Complies with UL98 service entrance requirements, and is NFPA 79 compliant

                 Click here for more information on L11 Disconnect Switches

                                                                                                                                                                                                                                 .

• Display Status Indicator
• Overload Condition Indicator
• Remote Reset
• Module Fault Indicator  (ground fault trip, jam trip, PTC trip)
• Phase Loss Indicator

The Intelli-button is a small, compact design rated Type 4/4x/12/13 and IP65/66.  It fits into a standard 22mm cut-out. 

 The Intelli-button allows you to safely identify the reason for a fault condition and reset without opening the panel door and having to wear the OSHA required arc flash suit.

Click here for more information

.

 

- A unique swivel head can switch from underground to overhead pulls.

- The self-positioning plate needs no anchoring for most pulls.

 - Two speeds: 80ft./min. and 20ft./min.

- Proven 4,000 pound pulling power.

- Integrated foot pedal for safe operations.

Low Cost crimp-on device for pulling wire. Ideal for contractors who do only occasional wire pulls. It is an econonical alternative with a low initial cost that will save Electrical contractors on labor hours and drastically reduce the cost of setting up mulitple wire pulls. Set-up time for a 4 wire pull is less than 5 minutes.Pulls are made by stripping the wire jacket back 3 inches and then, crimping the copper lug on the wire using a hydraulic die or dieless crimper, attach the cap and lanyard then start pulling.

RectorSeal Crimp-On Wire Grabber is available in a range of sizes (2/0 through 600mcm) to be used in sets to accomodate jobs of different sizes. They are used with resuable caps and lanyards. The lanyards are available in a  variety of sizes to make staggering mulitple wire pulls effortless.

Click Here for More Information

                                                                                                                      .