Simple- Easy-Reliable-Durable low cost single use device for pulling wire. Use once and then recycle along with scrap wire. The RectorSeal® Single-Use Wire Grabber™ is available in 18 sizes (8 AWG through 1000 mcm) to be used in sets to accommodate jobs of different sizes. Works on 600 volts through 35 KV wire and rated for both copper and aluminum wire. The lanyards are available in a variety of lengths to make staggering multiple wire pulls effortless especially through and around nineties. The small pulling head reduces friction; therefore there is no need to oversize conduit to accommodate the pulling head.

                                Click here for more information

.

                                      

 

- A unique swivel head can switch from underground to overhead pulls.

- The self-positioning plate needs no anchoring for most pulls.

 - Two speeds: 80ft./min. and 20ft./min.

- Proven 4,000 pound pulling power.

- Integrated foot pedal for safe operations.

Low Cost crimp-on device for pulling wire. Ideal for contractors who do only occasional wire pulls. It is an econonical alternative with a low initial cost that will save Electrical contractors on labor hours and drastically reduce the cost of setting up mulitple wire pulls. Set-up time for a 4 wire pull is less than 5 minutes.Pulls are made by stripping the wire jacket back 3 inches and then, crimping the copper lug on the wire using a hydraulic die or dieless crimper, attach the cap and lanyard then start pulling.

RectorSeal Crimp-On Wire Grabber is available in a range of sizes (2/0 through 600mcm) to be used in sets to accomodate jobs of different sizes. They are used with resuable caps and lanyards. The lanyards are available in a  variety of sizes to make staggering mulitple wire pulls effortless.

Click Here for More Information

                                                                                                                      .

National Meter Makes it Easy to Calculate Electrical Utility and Solar Transmission

 National Meter Industries has developed the ultimate in solar power net metering.  Comprised of 3 meters, this system will provide you with accurate readings of the Net Energy produced by your solar panels.  

 -Utility KWH – energy consumed from the power company

-Solar KWH – energy consumed from the solar panels

-Net KWH Generated – energy fed back to the utility from the solar panels

                                                                                                     .

RectorSeal made the BEST Wire Snagger EVEN BETTER!

-  Spring-loaded teeth for a stronger grip on the cable

-  Provides twice the pulling power of original tools

-  Proven to SAVE Contractors’ time and money.                  

For more information please click here!

                                                                                                 .

In attempts to better the planet and aid in GREEN

 building, Dongan has created their TP1- Series

 transformers.

                                                                                                                                                                                                                                 
Dongan’s series of TP-1 compliant transformers not only meet the high standards of excellence they have always held themselves to, but they also comply with energy efficiency standards established jointly by NEMA, the U.S. Department of Energy, and transformer manufacturers.  Meeting these efficiency standards reduces energy usage, and reduces the cost of ownership.

Key Features

• Made in the USA – Pioneer, Ohio
• Meets NEMA TP-1 energy efficiency standards
• Aluminum or copper windings
• Wound with electrostatic shields as standard
• Standard enclosures meet NEMA 3R indoor/outdoor requirements
• Non-standard designs available
• 10 Year Warranty

 Please Click Here for More Information  

                                                                     .

National Meter Industries produces a series of devices that can help you do just that!  One such device is the DH96 CPP Demand Control System.

Features

-Displays and records kW demand every minute – real time

-Accumulates kWh and peak demand

-Transfers the demand and use data(DDE) to a PC, every minute to EXCEL

With one-minute real time records, you can have the electric information you need to control your electrical usage before the capacity (demand) is reached. Anyone who is authorized can watch the electricity being used in the production process – expanding the management capability to increase productivity.

How Will this Help Me?                                       

-Reduce electricity demand

-Increased production per shift

-Decreased labor hours per unit

-Decreased kWh consumption

.

Use with metal or plastic cover plates………………0% labor vs putty pads

Metacaulk® Cover Guard™ is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. Metacaulk® Cover Guard™ is applied by hand, does not take up volume in the electrical box and is a labor saving replacement for putty pads in normal applications. Great for retrofit applications.  Reduces sound transmission.  Patent Pending. STC rating 54*. Complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops. U.S. Patent No. 6,207,085. *Tested in a UL 411 wall assembly/section to ASTM E90.

                                                                                                            .