Author Archive for admin

Rectorseal Single-Use Wire Grabber

                                              single-use wire grabber

Simple- Easy-Reliable-Durable low cost single use device for pulling wire. Use once and then recycle along with scrap wire. The RectorSeal® Single-Use Wire Grabber™ is available in 18 sizes (8 AWG through 1000 mcm) to be used in sets to accommodate jobs of different sizes. Works on 600 volts through 35 KV wire and rated for both copper and aluminum wire. The lanyards are available in a variety of lengths to make staggering multiple wire pulls effortless especially through and around nineties. The small pulling head reduces friction; therefore there is no need to oversize conduit to accommodate the pulling head.

                                Click here for more information

.

New KTU7 Series of Molded Case Circuit Breakers from Sprecher + Schuh

                                    sslogo                                                                                             

                               mainimage_ktu7

Check out Sprecher + Schuh’s new KTU7 series of molded case circuit breakers!

Sprecher + Schuh’s new series KTU7 molded case circuit breakers are ideal for non-motor applications, providing short circuit and over-current protection (thermal and magnetic).  These UL489 listed circuit breakers have features and optional accessories that make them stand out from the crowd …

Features:

  • Interrupt rating of 100kA (10A) and 65kA (30A) at 480Y/277V may allow higher overall panel short circuit rating
  • Up to 6 times higher interrupting rating versus traditional miniature circuit breakers
  • Smaller size saves panel space – just 45 x 102 x 85 mm
  • Clear identification of trips and the source – short circuit or overload
  • 100% rated up to 15A
  • UL489 and CSA22.2 listed, IEC 60947-2 compliant

Accessories:

  • Lockable operator knobs
  • KTA7 for motor loads and KTU7 for non-motor loads can be connected to a common compact bus bar providing a space reducing, price effective solution and a clean finished appearance.
  • Connection modules for the KTU7 circuit breakers simplify wiring and can reduce the number of DIN rails required, compacting panel space even further as well as reducing wiring errors and installation labor cost

 

Click here for more information

 

 

                                                                                                                                                                                                                               .

Think Remke for the stainless steel cord connectors you need

                   remke_logo                                 
                      Remke Cord Connectors
                            
                                                                                                                                           
                                       
                                           
       Remke’s stainless steel cord connectors provide

                    outstanding corrosion resistance! 
                                                  

Remke’s line of type 304 stainless steel cord connectors provides exceptional tensile strength and the highest levels of durability in severely corrosive environments filled with saltwater, acids or chemicals.  Upon request, type 316 stainless steel is also available.  Minimums may apply.  

More Great Features …

  • All connectors include an embedded o-ring for enhanced sealing capabilities
  • The combination tightening surface is a unique design that provides a large wrenching area for easy installation
  • Optional wire mesh grips and stainless steel locknuts available 

Click here for more information

 

 

                                                                                                                                                                                                        .

Niedax USA can meet all your cable management needs

                          

                     
                             
                    
                                                                                                                            
                                            
 
Niedax USA is a division of the Niedax Group, one of the largest maufacturers of cable tray systems in the world.  Their cable management product line includes wire mesh trays, lightweight ventilated and solid trays, surface metal raceways, and much more.  Here are highlights of two of their industrial products, which are pictured above:

Wire Mesh Tray System

  • Lightweight, flexible, and easy to install
  • Cable ventilation is perfect
  • Just need straight sections of tray, a universal splice kit, a bolt cutter and you are ready to go 
  • All kinds of fittings can be done onsite easily
  • Is available in both galvanized and stainless steel
  • Click here for more information on the Wire Mesh Tray System

Surface Metal Raceway

  • Designed for routing low voltage power circuits, data network, and control cables in industrial applications
  • System consists of a base section with a snap-on cover, dividers, and a wide range of fittings
  • It’s easy to install, expand, and reconfigure
  • Is available in both galvanized and stainless steel
  • Click here for more information on the Surface Metal Raceway

        

                                                                                           

                                                                         .

New Line of Polycarbonate Enclosures from Allied – POLYLINE

                                                                  

                                    POLYLINE - Allied Moulded's Newest line of polycarbonate enclosures JIC sizes

Allied Moulded’s new series of polycarbonate enclosures - POLYLINE - has features that won’t be found anywhere else …                               

  • Industry exclusive multi-mounting capability
  • Clear or solid cover offering good looks                
  • Corrosion resistant 4X and non-conductive
  • Adjustable hinged front panel design                        
  • Molded-in back panel bosses and center bosses for mounting DIN rail

                                         

                       Click here for more information on POLYLINE enclosures

 

 

                                                                                                                                                                                                                             .

New Series of Disconnect Switches from Sprecher and Schuh – L11

 

                                       

                                       

 

Sprecher and Schuh’s new L11 series 30 and 60 amp disconnect switches offers superior disconnect and short circuit protection needed, while only requiring a small amount of panel space – an optimal combination.  In addition, they are suitable for use in service entrance applications, and offer excellent short circuit protection for downstream equipment. 

Key Features…

  • Can be operated at up to 600V
  • Protects motors up to 30HP (@460V)
  • Can install on circuits capable of delivering up to 200,000A of short circuit fault current
  • Fusible and non-fusible
  • Fusible switches have removable IP30 fuse carriers, and optional LED blown-fuse indicators
  • Complies with UL98 service entrance requirements, and is NFPA 79 compliant

 

                 Click here for more information on L11 Disconnect Switches

 

 

                                                                                                                                                                                                                                 .

Sprecher + Schuh “Intelli-Button” Remote Indication Display

Introducing the Sprecher + Schuh CEP7-ERID remote indication display “Intelli-button”.  This new Intelli-button is the latest technology in communicating with the CEP7 solid state overload relay.  With the addition of a side mount module, the Intelli-button uses 4 easy-to-read LED indicators to provide overload status, and a reset button to electrically reset the overload relay.

CEP7-ERID

  • Display Status Indicator
  • Overload Condition Indicator
  • Remote Reset
  • Module Fault Indicator  (ground fault trip, jam trip, PTC trip)
  • Phase Loss Indicator

The Intelli-button is a small, compact design rated Type 4/4x/12/13 and IP65/66.  It fits into a standard 22mm cut-out. 

 The Intelli-button allows you to safely identify the reason for a fault condition and reset without opening the panel door and having to wear the OSHA required arc flash suit.

Click here for more information

 

 

.

Niedax-Kleinhuis Selects FItzgerald Spector Inc

June 1, 2011 – Niedax-Kleinhuis has announced the appointment of Fitzgerald Spector Inc as their manufacturer’s representative in Eastern PA, Southern NJ, Delaware, and Maryland.  Niedax-Kleinhuis is a leading manufacturer of cable tray and cable management systems for industrial and OEM applicatins.

The Strongest, Fastest and Most Versatile Cable Puller

                                       rectorseal
 THE STRONGEST, FASTEST AND MOST VERSATILE CABLE PULLER
 strongarm3 man
 - Quick and practical one-man operation.
 - Sets up and locks into position in 60 seconds.

- A unique swivel head can switch from underground to overhead pulls.

- The self-positioning plate needs no anchoring for most pulls.

 - Two speeds: 80ft./min. and 20ft./min.strongarm7 man

- Proven 4,000 pound pulling power.

- Integrated foot pedal for safe operations.

 

 

.

New From RectorSeal : Crimp-On Wire Grabber

 

co_groupLow Cost crimp-on device for pulling wire. Ideal for contractors who do only occasional wire pulls. It is an econonical alternative with a low initial cost that will save Electrical contractors on labor hours and drastically reduce the cost of setting up mulitple wire pulls. Set-up time for a 4 wire pull is less than 5 minutes.Pulls are made by stripping the wire jacket back 3 inches and then, crimping the copper lug on the wire using a hydraulic die or dieless crimper, attach the cap and lanyard then start pulling.

 

RectorSeal Crimp-On Wire Grabber is available in a range of sizes (2/0 through 600mcm) to be used in sets to accomodate jobs of different sizes. They are used with resuable caps and lanyards. The lanyards are available in a  variety of sizes to make staggering mulitple wire pulls effortless.

Click Here for More Information

 

 

                                                                                                                      .